MAR 8300
DESCRIPTION
A highly effective super plasticizer with a set retarding effect for producing free-flowing
concrete in hot climates. Also, a substantial water reducing agent for promoting high early
and ultimate strengths.
MAR-8300 is Suitable for use as a super plasticizer in the production of free-flowing
concrete with high slump more than 200 mm with free of bleeding and segregation.
It is also used as a water-reducing agent for production of high early strength concrete.
• Improved workability without increased water content.
• Lower pumping pressure.
• Compressive strength improved.
• Very high water reduction (depend on type of cement).
• Improved workability retention.
• Higher ultimate strengths.
• Reduced permeability.
• Non-toxic.
• chloride free.
It complies with ASTM C-494 Type G and BS 5075 Part 3.
Dosage Range 0.5 : 3.5% by weight of cement content.
Exact dosage rates are dependent on the type of effect sought, quality of cement &
aggregates, Water/Cement-ratio and ambient temperature.
All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
20 liter jerkins, 150 liter drums, 210 liter drums, 1000 liters Bulk Tanks.
Please note that as a result of specific local regulations the performance of this product
may vary from country to country.
▪ Safety Precautions
Accidental splashes to the skin must be washed off with water and soap.
Accidental splashes to the eyes or mucous membrane must be rinsed with clean
warm water. Seek medical attention.
▪ Ecology
Residues of material must be removed according to local regulations.
▪ Transport
Non-hazardous
▪ Toxicity
Non-toxic under relevant health and safety codes.
MAR-8300 makes modifications to its product datasheets on a continuous basis. Please
check the datasheet update section on https:marchemcc.com to ensure you have the
latest version.